• 12336 Emerson Dr, Brighton, MI 48116

UV MetalMask 733

UV MetalMask 733 is an economical component, UV cure masking resin that simplifies your process by offering fast, reliable protection for your parts. No measuring or special mixing required. It eliminates the need for fixtures, tapes, lacquers and wax in your metal finishing process and with the proper UV cure (irradiance), 733 will not leave a residue on the surface.

buy-now-blue

SKU: UV_MetalMask_733 Category:

Product Description

UV MetalMask 733 is an economical component, UV cure masking resin that simplifies your process by offering fast, reliable protection for your parts. No measuring or special mixing required. It eliminates the need for fixtures, tapes, lacquers and wax in your metal finishing process and with the proper UV cure (irradiance), 733 will not leave a residue on the surface.

UV Cure Guidelines

Light source: 400-600 W/in. mercury medium pressure arc or microwave lamp
Distance: focused light source with reflector for reduced part temperature
Total Energy Density (cm2): .9 W/cm2 (.68 J/cm2) * UVA
Belt speed: 20 ft./min.

UV cure rate is dependent on many variables, such as; coating thickness, lamp irradiance, distance from the light source and line speed. It is recommended that a radiometer be used to monitor irradiance.

Measured with an EIT UV Power Puck radiometer
Depth of Cure
UV_MetalMask 733 has superior depth of cure for a UV cure coating. Most UV_Mask formulations typically cure to a depth of .6 to 1.3 cm ( ¼” to ½”).

Storage and Handling
Surfaces to be masked should be clean and free of contaminants.
Avoid exposing the product to high temperatures and minimize exposure to artificial or natural light prior to curing. Cool the cured parts to room temperature before testing.

Note: The above information and recommendations concerning this product are based upon our laboratory tests and field use experience with this or similar products. However, since conditions of actual use are beyond our control, any recommendations or suggestions are made without warranty, express or implied. Manufacturer’s and seller’s sole obligation shall be to replace that portion of the product shown to be defective. Neither shall be liable for any loss, damage, or injury, direct or consequential, arising out of the use of this product. The information presented herein is our interpretation of certain test results and field experience to date. This information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification.

Reviews

There are no reviews yet.

Be the first to review “UV MetalMask 733”