UV MetalMask 730
is a UV curable, optically clear, low adhesion, tough film that is a easy manual peel off metal surfaces.
UV_MetalMask is an economical one component, UV cure masking resin that simplifies your process by offering fast, reliable protection for your parts. No measuring or special mixing required. It eliminates the need for fixtures, tapes, lacquers and wax in your metal finishing process and with the proper UV cure (irradiance), 730 will not leave a residue on the surface.
UV cured 6 mil thick film
UV Cure Guidelines
Light source: 400-600 W/in. mercury medium pressure arc or microwave lamp
Distance: focused light source with reflector for reduced part temperature
Total Energy Density (cm2): .9 W/cm2 (.68 J/cm2) * UVA
Belt speed: 20 ft./min.
UV cure rate is dependent on many variables, such as; coating thickness, lamp irradiance, distance from the light source and line speed. It is recommended that a radiometer be used to monitor irradiance.
Measured with an EIT UV Power Puck radiometer
Depth of Cure
UV_MetalMask 730 has superior depth of cure for a UV cure coating. Most UV_Mask formulations typically cure to a depth ofÂ .6 to 1.3 cm ( Â¼â€ to Â½â€).
Storage and Handling
Surfaces to be masked should be clean and free of contaminants. Avoid exposing the product to high temperatures and minimize exposure to artificial or natural light prior to curing.
Cool the cured parts to room temperature before testing.