• 12336 Emerson Dr, Brighton, MI 48116

Tubcoat 9350

Water based, blue in color contains no VOC, is ideal on any tub finish (acrylic, fiberglass or cast iron). Does not require any lubricating agent.

buy-now-blue

Product Description

According to industry data, 70% of tubs are damaged during construction and require repair before the home can be sold. Our tub protection peelable coatings protect tubs, whirlpools and shower stalls against scratches, abrasions and job site dirt and grime. Easy-to-apply, the water-based coating cures to a durable, easy-to-remove “protective skin.”

TubCoat is applied shortly after the tub is installed. Once the home is built and the final cleanup is scheduled, the protective coating is peeled away in one piece to form a bag enclosing all trash and debris, revealing a tub in showroom condition. TubCoat virtually abolishes tub repairs and reduces cleanup costs. Also, since all paint overspray is on the TubCoat layer, you eliminate the use of harsh flammable solvents to remove the overspray. Many of these solvents can dull and weaken fiberglass or acrylic surfaces.

TubCoat represents the ultimate in non-solvent, water borne, strippable coatings. TubCoat does not contain VOCs.

Benefits To You:

  • Cost effective solution for bathtub and shower fixture damage
  • Virtually eliminates tub and shower repairs caused during construction
  • Provides temporary protection through final inspection
  • Replaces crude or ineffective liner materials
  • Value added service for home buyers satisfaction
  • Professional image for contractor and builder

Protection Surfaces:

  • Bath tubs
  • Spa baths
  • Shower Trays
  • Other sanitary fixtures
  • Enamel
  • Acrylic
  • Gel-Coated Fiber Glass
  • Vitreous China

Application:

TubCoat is used as received, it can be applied by air or airless spray, roll coating, or brushing. Typically it is sprayed on the fixture using an airless sprayer. Apply product evenly to produce a dry film thickness of approximately 7-10 mils or wet film thickness of 14-20 mils. Drying time is dependent on temperature. At 70°F, product will dry in approximately 24 hours. You can enhance drying time by air movement and other suitable means.

Before applying TubCoat, carefully examine the fixture for any pre-existing damage. If damaged, contact the builder or owner before proceeding with installation of the coating. Do not apply to porous surfaces. Do not apply if temperature is below 45°F.

Operating Guidelines:

  • Chemical goggles and impervious gloves should be worn when handling TubCoat.
Water Based coating’s Wet films to Apply In Mils

4.5

6

9

11

13

14

16

18

21

Square feet of Coverage per Gallon

401

267

194

155

129

111

97

86

75

Dry Film Build Required In Mils

2

3

4

5

6

7

8

9

10

Solvent based coating’s wet films to apply

6.6

10

13

Square feet of Coverage/Gallon

250

160

50

 

TubCoat 9350 is superior coating system that does not require a lubrication or release agent and adheres to most surfaces.  For a more affordable 2 pack solution, please consider TubCoat 2630

Reviews

There are no reviews yet.

Be the first to review “Tubcoat 9350”