• 12336 Emerson Dr, Brighton, MI 48116

Stripaway 4580

Water resistant clear peelable coating prevents damage and scratches on glass and offers good sag resistance. Low temperature curing and low viscosity for air assisted spray. Stripaway 4580 is a great product for finished wood surfaces as well!

buy-now-blue

SKU: Stripaway 4580 Categories: , ,

Product Description

Stripaway 4580: Water resistant clear peelable coating prevents damage and scratches on glass and offers good sag resistance. Low temperature curing and low viscosity for air assisted spray. Stripaway 4580 is a great product for finished wood surfaces as well
General Chemical Corp.’s Stripaway 4580 is a peelable coating engineered for use on acrylic substrates like bathtubs, enamels, acrylic lenses (automobiles, helicopters), metals and wide variety of other surfaces. Typical applications include temporary protection for surfaces form damage, scratches, chipping and from exterior and interior environments.. The application of Stripaway 4580 coatings will protect surfaces from paint overspray or damage during manufacturing, storage and shipping. Stripaway 4580 represents the ultimate in non-solvent, water borne, strippable/peelable coatings. Stripaway 4580 does not contain VOCs.!

Application:
Stripaway 4580 is normally used as received. It can be applied by spray, roll or brush . Stripaway 4580 may also be diluted at the rate of one to four ounces of water per gallon or as needed for proper application. The sprayed coating dries, depending on the film thickness, in 30 minutes to 4 hours. Stripaway 4580 should be applied to yield a dry film from one to ten mils (.001″ to .010″) thick. The coating, when totally dry, is resistant to water and some solvents used in paint. Application temperatures range from 120º F. for fast force cure to no lower than 45º F. Stripaway 4580 cures upon water evaporation. Faster cure can be realized by placement of air fans to remove the water from the coating. The coating when applied is milky but when cured is totally transparent. The milky appearance is indicative of water presence in the coating. Brushes, rollers and spray equipment can be cleaned with water immediately after coating application. The coating becomes water resistant when clear .