• 12336 Emerson Dr, Brighton, MI 48116

PolyShield 4580

PolyShield is a water-based non-toxic Polymeric Barrier solution which forms an impermeable barrier between hazardous or contaminated materials and the environment. Apply PolyShield to any surface and various substrates to isolate and lock down loose contamination and prevent leaching of contaminates after decontamination efforts.

buy-now-blue

SKU: PolyShield Category:

Product Description

PolyShield 4580 is a water-based non-toxic Polymeric Barrier solution which forms an impermeable barrier between hazardous or contaminated materials and the environment. Apply PolyShield to any surface and various substrates to isolate and lock down loose contamination and prevent leaching of contaminates after decontamination efforts.

Application:

DeconPeel 4580 is normally used as received. It can be applied by spray, roll or brush . DeconPeel 4580 may also be diluted at the rate of one to four ounces of water per gallon or as needed for proper application. The sprayed coating dries, depending on the film thickness, in 30 minutes to 4 hours. DeconPeel 4580 should be applied to yield a dry film from one to ten mils (.001″ to .010″) thick. The coating, when totally dry, is resistant to water and some solvents used in paint. Application temperatures range from 120º F. for fast force cure to no lower than 45º F. DeconPeel 4580 cures upon water evaporation. Faster cure can be realized by placement of air fans to remove the water from the coating. The coating when applied is milky but when cured is totally transparent. The milky appearance is indicative of water presence in the coating. Brushes, rollers and spray equipment can be cleaned with water immediately after coating application. The coating becomes water resistant when clear .