• 12336 Emerson Dr, Brighton, MI 48116

Introduction: Decontamination Coating

The methods for removal of radioactive contamination which is deposited on surfaces or spread throughout a work area are mechanical or chemical.
DeconPeel coating traps and encapsulates a wide spectrum of radioisotopes and chemicals in easy to apply , no requirement for pre-preparation process allowing easy and safe disposal without the use of water. When dry, the product locks the contaminants into a polymer matrix. The film containing the encapsulated contamination can then be peeled and disposed.

Coat Various Surfaces and Substrates to Eliminate and Clean up of Radio Nuclei Contamination and chemical spills.

Chemical Solutions For effective decontamination:

  • Commercial nuclear power plants
  • Decommissioning and decontamination (D&D) sites
  • Chemical and radiological deposits and spills in manufacturing and laboratory environments
  • Nuclear medicine deposits and spills in hospitals

Benefits to You

  • Immediate control of the contaminants – Locks the contaminants within the coating
  • Environmental friendly, no waste water and a minimal amount of solid waste generated
  • Engineered to Works on vertical and horizontal surfaces
  • Safe…non flammable.
  • Suitable for virtually all substrates including polycarbonates, plastic and painted surfaces


One liter will cover approximately 4 square meters at a dry film thickness of 100 microns. You can also use following chart to calculate in mil thickness and gallon coverage.Approximate Square Feet Coverage Per Gallon of General Chemical’s Peelable coatings: