Introduction: Auto body Shop Paint Spray Booth Peelable Coatings:

Developed for application to walls and floors of paint spray booths and surrounding area. The peelable masking film protects the walls and floors of the spray booth area from paint overspray and yet maintains its integrity by not allowing solvent penetration. It can be quickly peeled from any surface, even when heavily laden with overspray.

General Chemical’s water based fast drying Peelable / Paint spray booth strippable coatings are temporary protective strippable coatings for Spray booths, Paint Booths, industrial floors & various surfaces such as paint booths spray booths, glass, decal, storage parts wood and others to protect it temporarily during industrial process or in material handling.

 

Main Advantages

 

  • Results in a reduction of labor costs.
  • Once cured, it provides an extremely tough, uniform film.
  • Curing time can be cut considerably with the use of heat lamps (100°F), circulation of air and other factors.
  • Easily removed. Peels off in sheets which eliminates messy hand scrapping.
  • Safe, non-flammable.
  • Suitable for all substrates including polycarbonates, plastic and painted surfaces.

Drying Time:
It is critical that Our Peelable coating film is allowed to cure dry. Drying time will vary according to humidity, temperature and weather condition. The evaporation of water will be speeded by air movement and warmth supplied by natural and mechanical means.

Adhesion:
Our Peelable coatings is a temporary protective Peelable coating and adhesion is low.

Process:
Our Peelable coatings once completely dry are resistant to water and solvent and acts as a mask against sprayed emulsion paints, lacquers, oil or grease and water.

Removal:
The dry Our Peelable coatings strippable coating film can be easily removed either by hand stripping or other means. Our Peelable coatings are thermoplastic. Do not try to remove in freezing conditions. Our Peelable coatings becomes brittle in freezing condition.

Clean Up:
Our Peelable coating is a water-based product and you can clean spray equipment and brushes with water. Do this immediately before peelable coating starts to dry.

PRESERVATION & STORAGE SYSTEM

Our Peelable coatings are used for long term preservation for the external storage of vehicles and equipment saving the use of internal storage space and also when they are loaded on deck, protected from the corrosive elements during the long sea voyage .

Similar applications apply to any components that may be exposed to the elements for long periods of time that would be affected by U.V. degradation, acid rain or corrosion. The General Chemical Preservation System Peelable maskants are non toxic, non flammable and the water borne skin tight film will not damage plastic or painted surfaces.

FOR MORE INFORMATION VIEW: PAINTSHIELD 5720

Automotive

TDS
Product
Color
Solvent
Water
Metals
Polyurethane
Storage Protection
Heavy Duty Usage
TDSFloorpeel 4000Clear
checkmark
TDSPaintshield 5140Clear
checkmark
checkmark
checkmark
TDSPaintshield 5720Clear
checkmark
checkmark
checkmark
checkmark
TDSStripaway 5201White Gloss
checkmark
checkmark
checkmark
checkmark

Coverage

One liter will cover approximately 4 square meters at a dry film thickness of 100 microns. You can also use following chart to calculate in mil thickness and gallon coverage.

Approximate Square Feet Coverage Per Gallon of General Chemical’s Peelable coatings:

General Chemical has a complete line of Peelable Masks to meet your challenging requirement. If we do not have something to meet your specific requirement, than we will develop it by working with you to meet that need for strippable coating.

  • PeelKleer 2880

    ,

    Peelkleer Overspray Masking Liquid-Dry is a water-based sprayable masking liquid designed to
    Dry to a non-tacky film. The dried film protects vehicle surfaces from automotive primer and paint
    Overspray, while trapping dust and dirt under the film. Safe to use on all thoroughly cured painted
    Surfaces.

    buy-now-blue

    View Product
  • PeelKleer 1830

    ,

    General Chemical's Peelkleer 1830 is a CLEAR water removable or strippable coating.  Temporary protective coatings such as 1830 for various application such as Auto Body shop Paint booth, paint booth windows and paint booth light fixtures where paint over spray accumulation must be readily removed. Protective Coatings and peelable maskant  such as 1830 can be removed by water or peeling . In Paint booth It will maximize Paint booth illumination and remain non-dusting. Thus, application of Peelkleer 1830 coating in auto body shop Paint Booth will result in optimum paint finish and minimize rejects

    buy-now-blue

    View Product
  • High Temp Coating 4880

    , , ,

    General Chemical's high temperature protective peelable coating cures to form a contour-hugging skin tight protective film on metals, glass or ceramics. This film is extremely useful in protecting items from overspray, dirt, etc. which undergoes high temperature cycles.

    For Instance: Metal hooks holding object to be painted become over sprayed.

    Solution: Apply High Temperature Coating 4880 on the hooks and after a few cycles of spray the film with the over spray paint can be peeled and the hooks are clean for further use. 4880 can be applied with a brush, roller, dip or airless spray. The cure is upon water evaporation to a transparent blue coating. Above is the study of 4880 films at various high temperatures conditions W Flashpoint: None

     

    buy-now-blue

    View Product
  • Floorpeel 4000

    , , , ,

    Clear Temporary Protective Strippable Coating For Industrial floors with Heavy traffic

    buy-now-blue

    View Product
  • Floorpeel 1820

    , , , ,

    FloorPeel 1820 is a temporary protective floor strippable coating and floor peelable coating formulated for epoxy floor maintenance of auto body shop paint spray booths. It protects floors from build-up of inks, spray track adhesives, paint tracks, lint, grease and grime. When it is time to clean, just peel it up. Floorpeel 1820 is designed especially for auto body shop paint booth floors. It has built in traction for walking to avoid slippage. 1820 films are tough and durable to handle heavy forklift and foot traffic. Perfect for floor areas around presses, spray areas, high traffic routes.

    Use Floorpeel 4000 for finished concrete floors and non-epoxy floors.

    buy-now-blue

    View Product
  • Boothcoat 5201

    , ,

    Boothcoat 5201 is a white peelable water based paint spray booth coating.

    buy-now-blue

    View Product
  • Boothcoat 5140

    , , ,

    Boothcoat 5140 is a clear peelable coating for walls, ceilings, floors, windows and light fixtures. One coating does it all when cured! Boothcoat 5140 is resistant to water, alkali and heat!

    buy-now-blue

    $29.00

    View Product
  • Boothcoat 2810

    , ,

    General Chemical's Boothcoat 2810 is a temporary clear peelable coating for paint spray-booth walls, ceilings, floors and other surfaces where paint over spray accumulation must be readily removed. Boothcoat 2810 can be used as a peelable coating on steel surfaces to eliminate flash rusting or as protection on glass, plexiglass, rubber, cement, aluminum and many other hard surfaces.

    buy-now-blue

    View Product